A network of airsofters in the Metro Atlanta area.


    a question for the people that know their lipos

    Share
    avatar
    red baron

    Posts : 40
    Join date : 2011-07-07

    a question for the people that know their lipos

    Post  red baron on 20.10.11 22:42

    Hey would an 7.4v 1200mah 20c lipo mess up an sr7?
    avatar
    NJSC
    Admin

    Posts : 2646
    Join date : 2008-12-31
    Age : 31
    Location : Buford, GA

    Re: a question for the people that know their lipos

    Post  NJSC on 20.10.11 23:01

    You should be good for a good while. I've almost always run lipos with no problems. Eventually a MOSFET will help guard against your contacts being fried. But I wouldn't hesitate to run one on a stock KWA.


    _________________
    Boom that just happened.
    avatar
    red baron

    Posts : 40
    Join date : 2011-07-07

    Re: a question for the people that know their lipos

    Post  red baron on 21.10.11 1:06

    sweet thanks
    avatar
    -a|ex

    Posts : 757
    Join date : 2010-09-10
    Age : 52
    Location : Tyrone, GA

    Re: a question for the people that know their lipos

    Post  -a|ex on 21.10.11 8:16

    your trigger contacts becomes a spark plug. some can handle it, others can't. it's hard to say how long it will last. pulling the trigger slowly may cause more sparks than quick pulls.
    avatar
    red baron

    Posts : 40
    Join date : 2011-07-07

    Re: a question for the people that know their lipos

    Post  red baron on 21.10.11 8:40

    oh i see, i can't decided on a g&g m14 or the kwa sr7.
    avatar
    just some kid

    Posts : 1231
    Join date : 2010-01-02
    Age : 23
    Location : Sharpsburg

    Re: a question for the people that know their lipos

    Post  just some kid on 21.10.11 16:25

    if it's for a dmr then get the m14.
    avatar
    Blaze

    Posts : 504
    Join date : 2009-02-04
    Age : 20
    Location : Newnan, Georgia

    Re: a question for the people that know their lipos

    Post  Blaze on 21.10.11 16:31

    I have both of those guns they are great. And about the lipo I have been using a 11.1 lipo in my SR7 for a long time now and still runs like a charm.

    CFA

    Posts : 34
    Join date : 2011-08-05

    Re: a question for the people that know their lipos

    Post  CFA on 21.10.11 17:13

    Kwa's are the best guns to run a lipo in(My opinion) Because they shoot soo smooth and sound cool
    avatar
    mwilson

    Posts : 177
    Join date : 2011-05-13

    Re: a question for the people that know their lipos

    Post  mwilson on 09.02.12 11:22

    anyone know about running a lipo on an echo 1 asc?
    avatar
    Twitch

    Posts : 1406
    Join date : 2009-02-12
    Age : 27

    Re: a question for the people that know their lipos

    Post  Twitch on 09.02.12 14:55

    To run lipo on an Echo 1...your going to need a mosfet at a minimum. Your probably going to need new gears and bushings, and a better piston as well.


    _________________


    avatar
    -a|ex

    Posts : 757
    Join date : 2010-09-10
    Age : 52
    Location : Tyrone, GA

    Re: a question for the people that know their lipos

    Post  -a|ex on 09.02.12 16:58

    7.4v 20c 1800mAH should be fine. avoid 11.1v or 50amp LiPo's (C rating x mAH = amp, 20c x 1800mah = 36amps). higher amps turns your trigger contacts into a spark plug. if you don't adjust your AOE, expect your piston pickup tooth to fail. Tamiya's (battery connector) will usually melt down after awhile.
    avatar
    TheRealBandit

    Posts : 122
    Join date : 2012-03-17
    Age : 21
    Location : Fayetteville

    Re: a question for the people that know their lipos

    Post  TheRealBandit on 19.03.12 18:38

    If you don't mind wieght, go M14. otherwise choose KWA

    Sponsored content

    Re: a question for the people that know their lipos

    Post  Sponsored content


      Current date/time is 19.09.17 20:21