Home
I was running a custom P90 with a small 11.1v 1500 mah zippy lipo battery. Recently I decided to put a huge zippy lipo on the gun (housed on top of the P90 box mag) and I need to add more wires to allow the battery to reach the gearbox wires. I was wondering how I should go about adding wire to either the gearbox or battery and how I should wire it through the gun. Advice?
2 posters
Re-wiring a lipo battery
CommandoMando- Posts : 1
Join date : 2012-12-22
#CW!!ZERO- Posts : 1268
Join date : 2009-01-04
Age : 33
Location : Fayetteville, Georgia
CommandoMando wrote:I was running a custom P90 with a small 11.1v 1500 mah zippy lipo battery. Recently I decided to put a huge zippy lipo on the gun (housed on top of the P90 box mag) and I need to add more wires to allow the battery to reach the gearbox wires. I was wondering how I should go about adding wire to either the gearbox or battery and how I should wire it through the gun. Advice?
Drill a hole in the most optimal spot and extend the wires from the gearbox, not much more advice. If you are wondering location to drill you are more then likely going to have to use your best judgement.