Home
I ordered an AGM SCAR, it came in the mail today....i shoot it....bb's drop down at about 75 feet. . . . no matter which way adjust the hopup. Suggestions?
5 posters
HELP?!?!?!
{ACE}Steve-o- Posts : 833
Join date : 2009-02-02
Age : 31
Location : Newnan
Q-bald- Posts : 855
Join date : 2009-02-10
Age : 53
Location : Newnan Ga
{ACE}Steve-o wrote:I ordered an AGM SCAR, it came in the mail today....i shoot it....bb's drop down at about 75 feet. . . . no matter which way adjust the hopup. Suggestions?
Have you taken it apart and inspected the Hop up?....Maybe they forgot to put the Nub in?
{ACE}Steve-o- Posts : 833
Join date : 2009-02-02
Age : 31
Location : Newnan
im gonna do that now. im scared to take these things apart cuz i always break em more. hahaha
Q-bald- Posts : 855
Join date : 2009-02-10
Age : 53
Location : Newnan Ga
I know what you mean man....My 1st AEG had the opposite problem, The BB went straight up at 75 feet. I found that the Arm in the Hop up needed to be shaved down so the nub would rise higher. But I've heard of some clones missing the nub from the factory.
Lone Wolf- Posts : 756
Join date : 2009-02-01
Age : 32
Yea a missing nub or a crack in the cylinder head will give you that result.
{ACE}Steve-o- Posts : 833
Join date : 2009-02-02
Age : 31
Location : Newnan
there is a nub....
Lone Wolf- Posts : 756
Join date : 2009-02-01
Age : 32
ok check to make sure the nub is pushing down on the bucking by turning it on. Just look down the barrel from the hop up end and you should see a bulge.
#CW!!ZERO- Posts : 1268
Join date : 2009-01-04
Age : 32
Location : Fayetteville, Georgia
Airnozzle not seating the right way, barrel being turned upside down in the chamber, or just the hopup sleeve being to thick for the little nub to push through the sleeve
navyseal1000- Posts : 820
Join date : 2009-03-27
Age : 28
Location : Macon, Georgia
If your not sure on how to do this, its best you leave it to Rhino; he won't let you down, he will get the job done fast and for a cheap price too compared to AA's labor.
#CW!!ZERO- Posts : 1268
Join date : 2009-01-04
Age : 32
Location : Fayetteville, Georgia
navyseal1000 wrote:If your not sure on how to do this, its best you leave it to Rhino; he won't let you down, he will get the job done fast and for a cheap price too compared to AA's labor.
well said Coby
{ACE}Steve-o- Posts : 833
Join date : 2009-02-02
Age : 31
Location : Newnan
Ryan is gonna take a look at it in the morning. Ugh.....i look at a gun and it breaks. Im cursed.
#CW!!ZERO- Posts : 1268
Join date : 2009-01-04
Age : 32
Location : Fayetteville, Georgia
just put a paper bag on your head while you play{ACE}Steve-o wrote:Ryan is gonna take a look at it in the morning. Ugh.....i look at a gun and it breaks. Im cursed.
{ACE}Steve-o- Posts : 833
Join date : 2009-02-02
Age : 31
Location : Newnan
I may need to do that.... ha.
Q-bald- Posts : 855
Join date : 2009-02-10
Age : 53
Location : Newnan Ga
{ACE}Steve-o wrote:Ryan is gonna take a look at it in the morning. Ugh.....i look at a gun and it breaks. Im cursed.
Post results please
{ACE}Steve-o- Posts : 833
Join date : 2009-02-02
Age : 31
Location : Newnan
Ryan fixed it. It was a messed up nub. The one in there was not large enough to make the hop up affective. Thanks ryan!
navyseal1000- Posts : 820
Join date : 2009-03-27
Age : 28
Location : Macon, Georgia
Glad to see Rhino helped you out!
Q-bald- Posts : 855
Join date : 2009-02-10
Age : 53
Location : Newnan Ga
Good deal...Im glad it was a simple fix 
navyseal1000- Posts : 820
Join date : 2009-03-27
Age : 28
Location : Macon, Georgia
Just to come out and say that if you are not sure what to do in the gun tech world, feel free to give Rhino a bump! 
|
|
|