G&G GR16 blow back integral suppressor help.

im trying to make my G&G m4 integrally suppressed. i attached a photo of what id like it to look like. im wondering what i can do to it to make it look like the photo in the cheapest possible way. im up for trying anything. i just dont want to have to buy al ot of stuff.

Well your going need a RIS assuming your gun doesn't already have one.

Here are some lower cost ones I found:
1. http://www.airsoftgi.com/product_info.php?cPath=30_37&products_id=3058

2. http://www.airsoftgi.com/product_info.php?cPath=30_37&products_id=8259

3. http://www.airsoftgi.com/product_info.php?cPath=30_37&products_id=4938

All of these rail systems require a real steel type delta ring to mount properly. If you do not have the real steel delta ring there are others on the site you can look for.

Second, your going to need a stubby barrel/ shorter our barrel.
1. http://www.airsoftgi.com/product_info.php?cPath=30_308&products_id=5776

It needs to be shorter or as short as the RIS for your design to work.

Now lastly you need a suppressor
1. http://www.airsoftgi.com/product_info.php?cPath=30_39&products_id=2357

2. http://www.airsoftgi.com/product_info.php?cPath=30_39&products_id=4583

3. Airdog also has some in stock that will work for what your trying to do

what i was actually thinking was the front sight (which i cut the top off of/ treads/ gas block are all one piece apart from the outer barrel, what i was thinking was just cutting the gas block down farther and cutting the outer barrel then sliding the gas block/ threads on to the cut barrel. would that work? and the m4 has a rail system already

http://www.airsoftpost.com/product_info.php?products_id=27823
I would get this and call it a day.

^ /thread