Home
Just some questions about my gun, what are some ways a gun could misfeed? I've already made sure its not the mags or bbs. How can I troubleshoot and how can i fix the problem?
5 posters
Misfeeding.
TheRealBandit- Posts : 122
Join date : 2012-03-17
Age : 28
Location : Fayetteville
Blaze- Posts : 504
Join date : 2009-02-04
Age : 27
Location : Newnan, Georgia
Sector Chip
cagcmc@gmail.com- Posts : 331
Join date : 2011-04-06
Location : Fayetteville NC
Blaze wrote:Sector Chip
either that or the hop-up or bucking
-a|ex- Posts : 757
Join date : 2010-09-10
Age : 60
Location : Tyrone, GA
shine a light up the feed tube. shoot it several times until the nozzle clears. if the nozzle doesn't clear all the way, then tappet plate can be worn. drop a bb in to see if it feeds manually. the bucking can also interfere with feeding.
on some occasions, if the sector gear is shimmed to high, it will rub against the tappet plate which will cause bb dropping or fps lost causing bbs to get stuck in the hopup then all fire at once.
misaligned bucking will cause misfeeding as well.
.12g or low quality .20g will sometimes get stuck in the hopup or inner barrel.
on some occasions, if the sector gear is shimmed to high, it will rub against the tappet plate which will cause bb dropping or fps lost causing bbs to get stuck in the hopup then all fire at once.
misaligned bucking will cause misfeeding as well.
.12g or low quality .20g will sometimes get stuck in the hopup or inner barrel.
TheRealBandit- Posts : 122
Join date : 2012-03-17
Age : 28
Location : Fayetteville
DEVELOPMENT. If I turn the gun upside down, it works perfectly
surefire pigeon- Posts : 270
Join date : 2011-01-15
Age : 27
Location : PTC
Is that with dropping a bb in or with the mag in upside down?TheRealBandit wrote:DEVELOPMENT. If I turn the gun upside down, it works perfectly
If it works 100% upside down, you can probably rule out gearbox internals.