Home
I have a M4 R.I.S. and I want to upgrade the internals (obivously.) i want a good RoF, M120,AB MOSFET ,6.03 Stainless barrel,and a Systema Turbo motor. Thats all I have planned so far. I want this thing to be a range/RoF/Accuracy beast. I am open to any suggestions. Thanks for all the help. (that I hope I get)
3 posters
What internals should I buy?
![WPeake23 [SOTHG]](https://2img.net/u/2713/75/72/23/avatars/85-19.gif)
WPeake23 [SOTHG]- Posts : 546
Join date : 2009-02-23
Age : 27
Location : Marietta
Tinman- Posts : 865
Join date : 2009-01-13
Location : Newnan, GA
Big question is do you do your own work?
There are a TON of different options completely dependent on your skill level and how deep your pockets are!
You are probably gonna need to lay out some specifics on SKILL and BUDGET as well as define what ROF you are seeking and what FPS you are wanting to maintain before you get targeted responses that you'll actually find helpful.
There are a TON of different options completely dependent on your skill level and how deep your pockets are!
You are probably gonna need to lay out some specifics on SKILL and BUDGET as well as define what ROF you are seeking and what FPS you are wanting to maintain before you get targeted responses that you'll actually find helpful.
WPeake23 [SOTHG]- Posts : 546
Join date : 2009-02-23
Age : 27
Location : Marietta
No, I do not do my own work. I want my RoF around 25 RPS. And as far a FPS 375 is good
Tinman- Posts : 865
Join date : 2009-01-13
Location : Newnan, GA
Then I would suggest a visit to Airdog here in Newnan . . . you'll get better knowledge/service than anywhere else in the metro area with great prices to boot.wpeake23 wrote:No, I do not do my own work. I want my RoF around 25 RPS. And as far a FPS 375 is good
Those specs are VERY do-able w/out having to go to a M120 spring even.
Start off by getting a good 9.6v battery and see how you like the ROF change . . . beyond that . . . let Tak and Rhino and the guys hook you up and map out some upgrades . . . they are MORE than fair on prices!
WPeake23 [SOTHG]- Posts : 546
Join date : 2009-02-23
Age : 27
Location : Marietta
i have a 9.6 now and a m120 thats all though
Tinman- Posts : 865
Join date : 2009-01-13
Location : Newnan, GA
Then go with a CA Bore Up Kit to take care of most of your piston/cylinder issues and a matrix turbo motor . . . that will likely take care of both goals.
sniper2525- Posts : 1036
Join date : 2009-02-21
Age : 32
hey dude i run all high speed set ups my m4 does close to 30 a sec and usualyh high speed set ups do not shoot 375 its usualy 315to320 so ur going to have to choos either fps or speed there is no both and i have been techn for a long time
WPeake23 [SOTHG]- Posts : 546
Join date : 2009-02-23
Age : 27
Location : Marietta
not even with a mosfet systema turbo and high speed gears
sniper2525- Posts : 1036
Join date : 2009-02-21
Age : 32
ya bc i have all those and a m120 and only get 330 fps but i also short stroked my piston which u are going to need to do so u dont stripp it then have a good shim job metal bushings new cylinder and head ball bearing spring guide and piston head then the gears motor and mosfet
WPeake23 [SOTHG]- Posts : 546
Join date : 2009-02-23
Age : 27
Location : Marietta
im shooting 355 with my m120, but i just got compression checked and got reshimmed.
sniper2525- Posts : 1036
Join date : 2009-02-21
Age : 32
ya but when u SHORT STROKE the piston it lowers fps and thats what u have to do for highspeed man
WPeake23 [SOTHG]- Posts : 546
Join date : 2009-02-23
Age : 27
Location : Marietta
oh ok thanks for the advice. im a noob when it comes to internals.
sniper2525- Posts : 1036
Join date : 2009-02-21
Age : 32
haha its fine man every one once was lol
|
|
|