High Speed Gears?

What's up? I wanted to stop by here and get some advice. I was going to buy a Mosfet along with a set of high speed gears. Does anyone know what would be the best choice for getting around 50+ rps? If I can get gears and up to 50 rps that would be nice
thanks,
-Coby

Good luck

Yeah I know....

Ok so I found these for a nice price and its Systema. And I hear that Systema makes one of the best gears on the market:

http://www.airsoftatlanta.com/product_p/60158.htm

navyseal1000 wrote:Ok so I found these for a nice price and its Systema. And I hear that Systema makes one of the best gears on the market:

http://www.airsoftatlanta.com/product_p/60158.htm

Someone lied to you! They make some of the worst gears! If you ever need some broke systema gears I have a pile of them I can give you! LOL!

I can get you over 50 but its gonna cost some serious $$$

I'm a little short on cash at the minute, want to trade my TM MP5A4 to get my Master Series upgraded to 50?
Trying to get $300 for MP5 that includes 2 8.4 large batteries and a hicap mag

good luck with that 50 rps i have spent over 1500 alone on my 46 rps m4

but that also alot of trial and error money lol

and like ryan said thos systema gears are junk i went through two sets of them... they are made of like cheapo metal that is extremely brittle

Wow nice triple post.
Coby why are you looking to get that kind of rof? If you can't really afford to put the cash up front then are you going to be able to maintain it? Airsoft guns break. That's the bottom line, and while I am not trying to take work away from Rhino I don't know if it would be the best idea to try and go for that extreme of a route. Personally I think a modest 25-30 rps is enough, but hey it's your cash (well TM MP5).

There comes a point where you just cant tell its much faster, i mean, 30 rps sounds like a weedeater, and 50 just sounds like a faster weedeater.


Did i mention that you will go through a midcap in 2 seconds? thats BRRRRRRRR or a highcap in 4? thats BRRRRRRRRRRRRRR, so if you want say.... to be able to provide for for more than 30 seconds you need 15 midcaps, or 8 highcaps

|337 wrote:There comes a point where you just cant tell its much faster, i mean, 30 rps sounds like a weedeater, and 50 just sounds like a faster weedeater.


Did i mention that you will go through a midcap in 2 seconds? thats BRRRRRRRR or a highcap in 4? thats BRRRRRRRRRRRRRR, so if you want say.... to be able to provide for for more than 30 seconds you need 15 midcaps, or 8 highcaps

Oh you will be able to tell the difference when you hear it. You have still yet to hear zeros P90. When it was on a 12 volt when he was trying out a custom piston, it was producing crazy sounds. You will be able to hear the difference. And russ seems to do fine with his rof and bbs plus hes going to double his rof in the near future.

Just high speed ratio gears and a MOSFET with not give you 50 RPS.

Crazy Twitch wrote:

|337 wrote:There comes a point where you just cant tell its much faster, i mean, 30 rps sounds like a weedeater, and 50 just sounds like a faster weedeater.


Did i mention that you will go through a midcap in 2 seconds? thats BRRRRRRRR or a highcap in 4? thats BRRRRRRRRRRRRRR, so if you want say.... to be able to provide for for more than 30 seconds you need 15 midcaps, or 8 highcaps

Oh you will be able to tell the difference when you hear it. You have still yet to hear zeros P90. When it was on a 12 volt when he was trying out a custom piston, it was producing crazy sounds. You will be able to hear the difference. And russ seems to do fine with his rof and bbs plus hes going to double his rof in the near future.

what i mean is that its not like the difference between 10 and 30

|337 wrote:

Crazy Twitch wrote:

|337 wrote:There comes a point where you just cant tell its much faster, i mean, 30 rps sounds like a weedeater, and 50 just sounds like a faster weedeater.


Did i mention that you will go through a midcap in 2 seconds? thats BRRRRRRRR or a highcap in 4? thats BRRRRRRRRRRRRRR, so if you want say.... to be able to provide for for more than 30 seconds you need 15 midcaps, or 8 highcaps

Oh you will be able to tell the difference when you hear it. You have still yet to hear zeros P90. When it was on a 12 volt when he was trying out a custom piston, it was producing crazy sounds. You will be able to hear the difference. And russ seems to do fine with his rof and bbs plus hes going to double his rof in the near future.

what i mean is that its not like the difference between 10 and 30

As in sounds?

there is a difference in sound my magpul m4 sounds way different than my seal bc my seal does 15rps faster...

There was a ton of difference between 30 and when i jumped up to 46rps, it was fast as an SOB, that thing ripped dude, but yeah it definately costs mucho money.

Hey man if you are interested in high rof I would look into a vortex bbmg. If you are any good with PVC and doing just a little bit of research, you can easily make a 50+ rps gun for about $40. Add another $120 or so and you can make it CO2 powered and complety portable. Depending on what pressure you use, I have seen the fps range from 330-450. Oh, and you can make the BB capacity about as large as you want it. Mine holds 2000-3000.

Here's a link:

http://www.airsoftforum.com/board/Homade-Vortex-Bbmg-Shoo-t76471.html&pid=17386785

Also, search for "Ultimate Inline"

how are these? http://www.airsoftpost.com/product_info.php?products_id=29526

Not gonna cut it or get him to his goal.

Rhino wrote:Not gonna cut it or get him to his goal.

well how are they if your looking at like a 35rps set up

That piston won't last long! 50 rps is no easy task!!!! Out of all the guns that come to our games I'm the only one with a gun doing over 50. If it was an easy task you would see more of those 40+ setups around.

Rhino wrote:That piston won't last long! 50 rps is no easy task!!!! Out of all the guns that come to our games I'm the only one with a gun doing over 50. If it was an easy task you would see more of those 40+ setups around.

Well I understand that I'm wondering about the gears, how would that last on a 35rps set up

Rhino wrote:That piston won't last long! 50 rps is no easy task!!!! Out of all the guns that come to our games I'm the only one with a gun doing over 50. If it was an easy task you would see more of those 40+ setups around.

Hmm...what about that custom airdog piston?

And what about a Strafer for rof? Heck with all the gears, batteries, pistons, gear boxes, and all the other internals, just buy a Strafer for a few $100 more and you have your self 170 rps.
Case closed.