Home
After playing a game with this gun I realized...damn...I basically shot $30 out of this guns barrel...in one day...
No trades
No refunds
Pricing is shipped
Alright so this has been my baby for a LONG time. I've loved this gun to death but frankly I'm sick of M4's and really want to go into the DMR realm. Plus the speed of this gun is just raping my wallet.
I'll start by stating the problems, first. This gun is missing the following: hop up unit, charging handle spring.. Otherwise this gun is complete. I am not sure if this gun will feed on a 11.1v, as I primarily used this gun for ONE game with a 7.4v. Also, the stock has a hole drilled in it for an external battery but I found that a 2200 mah fits perfectly fine and gives the gun enough juice. Optimally you want to run a battery bag with a 3000+ mah 30+ c battery to get the motor the extra umph it needs.
Externals:
G&P Navy Skull body
G&P Stubby stock
G&P 416 style grip
KA accessory kit:
-charging handle
-bolt catch
-magazine catch
-body pin
Madbull Talon front end
Internals
G&G modded 8mm GB shell
SHS 8mm steel bushings
Jing Gong 18:1 steel bevel and spur
RiotSC dual sector gear
RiotSC SP110 spring and spacer
G&G ball bearing spring guide
SHS 15 teeth piston (6 teeth removed, swiss cheesed)
Bravo POM piston head no bearings
SHS V2 cylinder head
G&G anodized cylinder
KWA anti reversal latch
Guarder air nozzle w/ o-ring
Guarder tappet plate (unmodded)
G&G switch with 16 g teflon wire
SHS ultra torque motor
Hunterseeker5 mosfet w/ 30a polyfuse
3/16 pad sorbo with 1/16 pad of neoprene on top
I am going to ask $320. The Talon kit and the G&P body total close to that, so you're getting an absolute steal.
Optional:
-JG 300 rd hi cap x3
-G&P aimpoint replica in tan
-Madbull AFG in black
-Magpul MBUS sights (clone)
https://www.youtube.com/watch?v=ePD7omu-QBA
No trades
No refunds
Pricing is shipped
Alright so this has been my baby for a LONG time. I've loved this gun to death but frankly I'm sick of M4's and really want to go into the DMR realm. Plus the speed of this gun is just raping my wallet.
I'll start by stating the problems, first. This gun is missing the following: hop up unit, charging handle spring.. Otherwise this gun is complete. I am not sure if this gun will feed on a 11.1v, as I primarily used this gun for ONE game with a 7.4v. Also, the stock has a hole drilled in it for an external battery but I found that a 2200 mah fits perfectly fine and gives the gun enough juice. Optimally you want to run a battery bag with a 3000+ mah 30+ c battery to get the motor the extra umph it needs.
Externals:
G&P Navy Skull body
G&P Stubby stock
G&P 416 style grip
KA accessory kit:
-charging handle
-bolt catch
-magazine catch
-body pin
Madbull Talon front end
Internals
G&G modded 8mm GB shell
SHS 8mm steel bushings
Jing Gong 18:1 steel bevel and spur
RiotSC dual sector gear
RiotSC SP110 spring and spacer
G&G ball bearing spring guide
SHS 15 teeth piston (6 teeth removed, swiss cheesed)
Bravo POM piston head no bearings
SHS V2 cylinder head
G&G anodized cylinder
KWA anti reversal latch
Guarder air nozzle w/ o-ring
Guarder tappet plate (unmodded)
G&G switch with 16 g teflon wire
SHS ultra torque motor
Hunterseeker5 mosfet w/ 30a polyfuse
3/16 pad sorbo with 1/16 pad of neoprene on top
I am going to ask $320. The Talon kit and the G&P body total close to that, so you're getting an absolute steal.
Optional:
-JG 300 rd hi cap x3
-G&P aimpoint replica in tan
-Madbull AFG in black
-Magpul MBUS sights (clone)
https://www.youtube.com/watch?v=ePD7omu-QBA
