Rules:
-Will be shipped UPS ground w/ insurance
-Warranty of 2 weeks upon arrival
-Any and all issues have been stated
-NO PART OUTS NO PART OUTS NO PART OUTS
-Email: eelenegue@gmail.com
VFC M4A1 E-Series
Internally:
RiotSC 14:1 high speed gearset
Modify 8mm steel bushings
SHS 15 steel teeth piston
SHS o-ring air nozzle
SHS anti reversal latch
Systema M120 spring
VFC ball bearing spring guide
VFC aluminum piston head
VFC cylinder head
VFC polished cylinder
VFC tappet plate
Sorbothane with neoprene pad
MOSFET w/ polyfuse + 16AWG wiring
PDI bucking, modified
VFC 6.05mm barrel
Externally:
AMP M4A1 RAS
G&G bipod grip
G&P SPR front sight
G&P flip up rear sight
Echo 1/JG full stock
Madbull flash hider
Comes with: 11.1v 3000mah 30C, 300rd hi cap w/ MagPul, stock external and internal parts.
OPTIONAL: Set of contact patches, M-nubs, (6) extra high caps, and ACM Eotech 553 replica.
Issues: paint has been worn off on magazine catch from disassembly, easy fix. Motor warms up even when dry, indicating the motor has some small issues. When I placed a friends JG red motor, it pulled the gun fine without warming up. Slight external wear however it is in excellent condition, especially on the body. Bolt catch spring is missing, and so bolt catch wasn't installed but will be included with the mechanism, you just need a replacement spring. PDI bucking has the nub removed to accomodate contact patches however time is absent and I haven't gotten around to doing that mod, hence there is going to be no hop up applied when you shoot the gun. $6 bucking replacement or installation of optional parts will alleviate any issue.
Chronos: 28 RPS/ 430 FPS on the dot.
Price: $400. The gun was $270 shipped and the gears are $110. This is a good deal. Only issue is a replacement bucking and warm motor, really.
PLEASE EMAIL ME FOR ANY COMMENTS, QUESTIONS OR CONCERNS. THANK YOU. IF YOU CANNOT PM, EMAIL: eelenegue@gmail.com
-Will be shipped UPS ground w/ insurance
-Warranty of 2 weeks upon arrival
-Any and all issues have been stated
-NO PART OUTS NO PART OUTS NO PART OUTS
-Email: eelenegue@gmail.com
VFC M4A1 E-Series
Internally:
RiotSC 14:1 high speed gearset
Modify 8mm steel bushings
SHS 15 steel teeth piston
SHS o-ring air nozzle
SHS anti reversal latch
Systema M120 spring
VFC ball bearing spring guide
VFC aluminum piston head
VFC cylinder head
VFC polished cylinder
VFC tappet plate
Sorbothane with neoprene pad
MOSFET w/ polyfuse + 16AWG wiring
PDI bucking, modified
VFC 6.05mm barrel
Externally:
AMP M4A1 RAS
G&G bipod grip
G&P SPR front sight
G&P flip up rear sight
Echo 1/JG full stock
Madbull flash hider
Comes with: 11.1v 3000mah 30C, 300rd hi cap w/ MagPul, stock external and internal parts.
OPTIONAL: Set of contact patches, M-nubs, (6) extra high caps, and ACM Eotech 553 replica.
Issues: paint has been worn off on magazine catch from disassembly, easy fix. Motor warms up even when dry, indicating the motor has some small issues. When I placed a friends JG red motor, it pulled the gun fine without warming up. Slight external wear however it is in excellent condition, especially on the body. Bolt catch spring is missing, and so bolt catch wasn't installed but will be included with the mechanism, you just need a replacement spring. PDI bucking has the nub removed to accomodate contact patches however time is absent and I haven't gotten around to doing that mod, hence there is going to be no hop up applied when you shoot the gun. $6 bucking replacement or installation of optional parts will alleviate any issue.
Chronos: 28 RPS/ 430 FPS on the dot.
Price: $400. The gun was $270 shipped and the gears are $110. This is a good deal. Only issue is a replacement bucking and warm motor, really.
PLEASE EMAIL ME FOR ANY COMMENTS, QUESTIONS OR CONCERNS. THANK YOU. IF YOU CANNOT PM, EMAIL: eelenegue@gmail.com