HomeHey everyone I'm about to get a used TM M16 all upgraded, its currently shooting 8-9 bps which is all too low for me. I would like to get it up to 15+ nothing higher than 20 bps. I was thinking I should get a matrix turbo motor, do you guys recommend anything as good or better and under $60?
+2
Admin
Airsoftguy238
6 posters
TM M16 ROF/Motor Upgrade
Airsoftguy238- Posts : 1423
Join date : 2009-03-28
Age : 30
Location : College Park
Admin- Admin
- Posts : 2096
Join date : 2008-12-30
Location : Acworth
What kind of spring does it have in it?
G&G makes some excellent motors, and I'll need to know what king of spring it's got to tell you which one would work best.
G&G makes some excellent motors, and I'll need to know what king of spring it's got to tell you which one would work best.
UBCS Gibbs- Posts : 192
Join date : 2009-01-06
Age : 35
Location : Milton City
8-9 rps? That means something is wrong, unless you are pulling a friggen m140 or higher.
I am still trying to sell my turbo motor for $60...
I am still trying to sell my turbo motor for $60...
Airsoftguy238- Posts : 1423
Join date : 2009-03-28
Age : 30
Location : College Park
It's got a m120 and a marui eg700 and alumninum piston
Admin- Admin
- Posts : 2096
Join date : 2008-12-30
Location : Acworth
Get a G&P M120. EG700's are pretty bad for hightorque. But the EG1000 is pretty nice.Airsoftguy238 wrote:It's got a m120 and a marui eg700 and alumninum piston
Thread cleaned...
#CW!!ZERO- Posts : 1268
Join date : 2009-01-04
Age : 33
Location : Fayetteville, Georgia
Admin wrote:Get a G&P M120. EG700's are pretty bad for hightorque. But the EG1000 is pretty nice.Airsoftguy238 wrote:It's got a m120 and a marui eg700 and alumninum piston
Thread cleaned...
Are the G&P 120 motors good, I have heard bad stuff about them.
|337- Posts : 880
Join date : 2009-01-01
Age : 31
Location : Brooks i.e. middle of nowhere
pinions are a tad soft though
Admin- Admin
- Posts : 2096
Join date : 2008-12-30
Location : Acworth
The only bad things I've heard about G&P M120's are when people try to use them as hightorque motors, which they are not.
|337- Posts : 880
Join date : 2009-01-01
Age : 31
Location : Brooks i.e. middle of nowhere
Mine struggled to pull an m120 but it is pulling a ss'd m110 now and is doing better
#CW!!ZERO- Posts : 1268
Join date : 2009-01-04
Age : 33
Location : Fayetteville, Georgia
|337 wrote:Mine struggled to pull an m120 but it is pulling a ss'd m110 now and is doing better
Yeah I was reading last night and they sounds like crap, I would stick with either the Matrix or Systema Turbo motors.
Tinman- Posts : 865
Join date : 2009-01-13
Location : Newnan, GA
#CW!!ZERO wrote:I would stick with either the Matrix or Systema Turbo motors.
Ditto that . . . the Matrix is great for the $$ . . . your rate of fire sounds REALLY low even for that setup . . . sounds like you are still running 8.4v?? If so, try throwing a high discharge rate 9.6v on it . . . cheaper and ususally better bang-for-the-buck speed change than a new motor.
UBCS Gibbs- Posts : 192
Join date : 2009-01-06
Age : 35
Location : Milton City
+1 to systema motors. They are the best non-stock motors that I have used.
#CW!!ZERO- Posts : 1268
Join date : 2009-01-04
Age : 33
Location : Fayetteville, Georgia
UBCS Gibbs wrote:+1 to systema motors. They are the best non-stock motors that I have used.
But you have to fix the shorting out problem or it will come back to bite you over time.
Similar topics
