MOSFET question

I need a MOSFET cause he gun I have now only can run a lipo VFC Defender with G&p m120 motor and a m120 spring on a 11.1v I get 30BPS at about 380FPS I need a MOSFET also because my fun doesn't have a fuse. I want to also convert to deans connectors. Are they worth it? Also what is a good MOSFET that isn't a stealth trigger and doesn't have AB( I don't want the extra stress on my motor)?

Please help me guys!

iirc -alex runs non AB MOSFETS. He'd be a good person to ask.

he makes reliable non-AB mosfets for $15

Disguised enemy makes my favorite fets. They are absolutely incredible for 15$.

Electioneer alsomakes very nice mosfets in my oipinion. I have a couple of them. He doesnt get on the forums much anymore, probably going to need to take it to Airdog if you want one.

if you have room you can always do the bobfet
use a 12 volt relay from the parts store
they range from 5 to 12 bucks.
use them to switch the ground to the motor.
i have three running on guns .
ics m4 33 rps 380 fps
ics m4 29 rps 420 fps
a&k spr 550 fps rps n/a
all running 11.1s
all running over a year
i will post up some pics,these things run fog lights and window motors in cars
they easily run aegs.i have had bad luck with mosfets.

poopdaddy wrote:you can always do the bobfet

this

I've used one in a VFC M4 getting 30rps and about 380fps. These things are incredibly hard to burn out IMO.

Not to thread jack but I would like to here more about bobfets I have already had the worst luck with mosfets. Longest one Ive had was from reed yet it pooped out on me.....

i will get some pics and how to up soon
Christmas has me running at the shop.
i put a small window relay in mo's gun and it seems to be working well.
i cost a few bucks more than the universal fog light ones but its just a little bigger than a mosfet.
most say the arc as trigger contacts touch burn them up.
i say its the amps that the motor pulls thru the contacts that burn them.
lotta rounds thru the twins and the relays prove to be better than any fet i have tried or heard of people using.

Okay thank I would greatly appreciate it

Can't wait to see the pick Bob. Was looking at doing this for a couple of the guns.

sorry i have not posted it up yet
i am re-doing one of the ics m4s tonight
looking for 40 rps or more
i will give a step by step for the bobfet and the advance auto parts part #
and pics
later
POOP

i went ahead and ordered a 10 pack of irlb3034 mosfets ($25). might as well start making my own non-AB mosfets.

I tried making my own mosfets and ending up ordering a bunch off 3034 off digikey. Dang mine were messy and decided disguised enemy are the same and it cost about 8-10$ worth of parts anyway. And he sells them for 12$ of you buy 4.